5.8G Wireless Bridge PTMP WiFi PTP Point to Point Long Range Outdoor Wireless Access Point Extender Network CPE 2KM Transmission Distance with 12DBi Antenna 2 LAN 100MBps 24V PoE Power Supply 2 Pack

Description

Facebook Bridge

Bluedery CPE220 network bridge is a 5.8G Long Range Wi-Fi Extender Outside Wi-Fi Ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to make sure interoperability. Point-to-point pairing also will also be done by dialing with no need to get admission to the GUI, steer clear of the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional 5.8G Wireless Bridge PTMP WiFi PTP Point.
PTMP Pre-programmed: The installation of this Wi-Fi Outside extender aka long range Outside wireless get admission to point extender is very simple. Simply connect the both bridges to Poe adapters through the Ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the “Link” green LED indicator will turn on to indicate that the both bridges have been paired successfully.
The usage of 5.8G / 100Mbps wireless transmission rate between wireless Ethernet bridge can give a boost to 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet get admission to sharing, remote video camera surveillance, or remote network Wi-Fi get admission to Point.

5.8G Wireless Bridge PTMP WiFi PTP Point

Long Range Wi-Fi Extender Point to Point Mode: Connect both Outside Wi-Fi extender to the Poe power adapter will auto pair, no need connects to computer for the complicated configuration, at point-to-point mode can use for long range video surveillance and internet network sharing, the master bridge output Wi-Fi hot point, you’ll be able to enter password to get get admission to, extend the WiFi get admission to coverage up to 1.2 miles in 60 degrees angle of the front direction 5.8G Wireless Bridge PTMP WiFi PTP Point.
Point to A couple of Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, This network bridge aka long range Wi-Fi Outside wireless get admission to point extender can facilitate you manage different building’s IP cameras in one system without wiring. The CPE880 was the only one I could find that had the environmental specs that I needed since we live in Colorado and temperature can get down to -30F in rare cases. Setup was fairly straightforward (and much easier than the NanoBeam) and the system initially paired flawlessly. I did not set up any of the custom Wifi config since I already have my own mesh network.

Initially I used channel 0 but had an ongoing issue with packet loss every 10 seconds on the master side. There was solid internet before and after the POE injector but the connection failed every 10 seconds or so for about 2-3 seconds. See image one.

I dealt with this for a day and limped along and contacted support and was about to return the devices and order Starlink. Support got in touch with me and asked to see a video of the issue – See video. I also contacted Amazon’s technical support which was surprisingly attentive for such a technical issue and while couldn’t really help they seemed to grease the skids in terms of making sure I would get a new unit if I needed one.