Description
Kind tips:
We recommend that you turn off the water supply to the sprayer when not in use to prolong the life of the sprayer and avoid any accidents. If this is not conceivable, use a T-valve to control the water supply contained at a low level (suitable for use as a hand bidet) so that the water pressure on the hose and sprayer is not as high.
how to use?
Step 1: Turn off the water supply.
Turn off the water supply valve on the wall next to the toilet. Turn it clockwise all the way. Flush the toilet and hold down the handle to completely empty the toilet tank.
Step 2: Make sure there are rubber grommets on both ends of the female header.
Verify that the flat rubber washer is inside the top of the bidet tee valve (tip: the top of the tee valve is where the swivel nut is), and push it all the way down to tighten the connection.
Step 3: Connect T-Valve and Hose
Screw the top of the T-valve onto the toilet inlet valve where you just unscrewed the water supply hose. Be careful not to overtighten the connections. Thread the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the hand bidet hose to one side of the T-valve. Screw the bidet nozzle onto the other end of the bidet hose.
Step 4: Turn on the water supply and install the sprayer Turn the water supply valve back on. If you notice any connections are loose or leaking, you may wish to add some plumbers tape. If you haven’t any leaks, then your handheld bidet sprayer is all set up and ready to use! Toilet Bracket: Screw the bracket onto the toilet tank clamp. Lift the toilet tank lid, slide the clips to the side of the tank, and close the lid. Wall Mount: Use drywall screws and anchors to safe the bracket to the wall.
Powerful Water Stream: Controls the water pressure for a gentle and thorough clean. In jet mode, you get a strong stream of water, which is also great for cleaning toilets or bedpans.
Good leak-proof effect: The hose is double safe by stainless steel shell and EPDM inner tube (better than PVC), which eliminates the problem of leakage, higher quality and durability, and the surface adopts advanced wire drawing process, which has good oxidation resistance and exquisite workmanship. You don’t want to worry about leaks.
EASY TO INSTALL: Comes with an installation kit so you don’t want to buy anything else. You are going to need about 10 minutes to install this toilet hand held bidet shower set without any help. The bathroom bidet sprayer has two installation methods, can be installed on the wall or on the toilet tank, easy to install, no plumber required.
ECO-FRIENDLY CLEAN: Paper comes from trees. Not to mention the trees felled and the water used to produce toilet paper. Now the Handheld Bidet Sprayer prevents all that. It is very convenient for more than a few washing activities such as bathing pets, washing clothes, cleaning diapers and so on.
Our Services: Contact us for free, we are all the time at your service. Both our product quality and service will meet or exceed your needs.
Reviews
There are no reviews yet.