GOOZEEZOO 2023 Upgraded Malachite DSP SDR Receiver 50kHz-2GHz All Band Radio AM SSB(LSB USB) NFM WFM with 3.5-inch Touch Screen & 2000mAh Battery

Amazon.com Price: $169.99 (as of 02/01/2024 20:36 PST- Details)

【1.10A Malachite SDR Radio】The All Band Radio Receiver is built based on the principle of DSR – its functions are determined by the loaded software. All types of analog modulation: AM/SSB/NFM/WFM. Using a Multi-Functional chip MSI001, the dynamic blocking range is approximately 85dB.
【Frequency Range】 Frequency range from 50kHz to 250MHz and 400MHz to 2GHz (registered upgrade version). Select Frequency Step: Press the frequency knob to switch to step mode, and then use the frequency knob to adjust as needed. Minimum Step: 10Hz ; Maximum Step: 30KHz. Powerful STM32h743 with clock frequency of 480MHz applied
【High Sensitivity】 Built-in Variable Filter Width, Adaptive Noise Suppressor, Threshold Noise Suppressor, Noise Bianker AGC Equalizer making the radio more powerful. The sensitivity of the Malahit Radio is 0.3 at s/w under conditions up to 250MHz μ V=10dB. LNA/MIX, MIX GR: Do not turn on the functions that are not available, otherwise the gain and sensitivity will decrease significantly! RF GAIN: The sensitivity is optimal when set at around 20

Description

VISUAL:
BRIGHT MIN:20;BRIGHT MAX:100
REDUCT TIME:0 sec
SLEEP TIME:300 sec
LCD SLEEP:D、E
FFT ave:50
FFT scale:50
FFT color:4
Pan percent:70%
WTF delay:0
WTF Gain:0dB
FFT fill:D、E
The BAND band key allows for switching between bands and memory selection.
The memory is divided into 5 pages, with 10 per page; It may be stored in any memory.
For future reference. When storing, first adjust the frequency, mode, step, AGC, RF Gain, FLT parameters, PRE, and other data, then select the storage page and location, press and hold the memory box with your finger, hear the “beep” sound, and release it.

【1.10A Malachite SDR Radio】The All Band Radio Receiver is built based on the principle of DSR – its functions are made up our minds by the loaded software. All types of analog modulation: AM/SSB/NFM/WFM. The use of a Multi-Functional chip MSI001, the dynamic blocking range is approximately 85dB.
【Frequency Range】 Frequency range from 50kHz to 250MHz and 400MHz to 2GHz (registered upgrade version). Select Frequency Step: Press the frequency knob to switch to step mode, and then use the frequency knob to adjust as needed. Minimum Step: 10Hz ; Maximum Step: 30KHz. Powerful STM32h743 with clock frequency of 480MHz applied
【High Sensitivity】 Built-in Variable Filter Width, Adaptive Noise Suppressor, Threshold Noise Suppressor, Noise Bianker AGC Equalizer making the radio more powerful. The sensitivity of the Malahit Radio is 0.3 at s/w under conditions up to 250MHz μ V=10dB. LNA/MIX, MIX GR: Do not turn on the functions that don’t seem to be to be had, in a different way the gain and sensitivity will decrease significantly! RF GAIN: The sensitivity is optimal when set at around 20
【 2000mAh Battery & 3.5inch Touch Screen】 The Shortwave Receiver powered by external TYPE-C interface which built-in 2000mAh battery. By connecting to the computer via USB, CAT, IQ, and audio can also be transmitted. The screen with backlight keep watch over has been optimized and the touch chip has been replaced, making it more sensitive to touch.(Adopt 3.5 inch IPS touch screen).
【Signal Reception】 The SSB Shortwave Radio adopt double shielded (both shell and shielding) to cover which have Better noise shielding effect. A built-in receiving module has been developed to toughen HF reception on the antenna, and an additional board with a source follower has been developed, for you to be built into the standard receiver.

Additional information

Product Dimensions

Item Weight

Batteries

Date First Available

Manufacturer

Country of Origin

Brand

Reviews

There are no reviews yet.

Be the first to review “GOOZEEZOO 2023 Upgraded Malachite DSP SDR Receiver 50kHz-2GHz All Band Radio AM SSB(LSB USB) NFM WFM with 3.5-inch Touch Screen & 2000mAh Battery”